Utah Trikes Site Banner
|
|
Twitter
Pinterest
Instagram
YouTube
Facebook
Nationwide Sales & Service
Mon-Fri 9-5
Toll Free: 866-446-2065


GET 18-MONTH 0% INTEREST FINANCING ON ANY PURCHASE W/UTAH TRIKES CARD!
CHECK OUT OUR CHRISTMAS COUNTDOWN SALE GOING ON NOW!


Category
Trikes (13)
Accessibility Aids (5)
Accessory Mount (3)
Battery Mount (5)
Boom (1)
Boom Easy Adjust (1)
Cargo Bag (1)
Chain Tube (3)
Computer Display Mount (2)
Computer Sensor Mount (1)
Fenders (12)
Flag (1)
Frame Kit (2)
Frame Protection (1)
Front Gearing (1)
Front Suspension (14)
Front Wheels (2)
Handlebars (2)
Headrest (2)
Hub (1)
Idler (2)
Pedals (2)
Rear Cargo Rack (9)
Rear Derailleur (1)
Rear Suspension (3)
Rear Wheel (2)
Seat (17)
Seat Cushion (2)
Seat Wings (1)
Shifters (1)
Steering Components (5)
Water Bottle (1)
Water Bottle Holder (1)
Wheel Building (1)

Brands
HP Velotechnik (124)

Min Price

MaxPrice

HP Velotechnik

HP Velotechnik Recumbent Trikes

Sit back, relax, and enjoy the ride - recumbents and trikes are the perfect form of transportation for active people. HP Velotechnik has been working for more than 16 years on creating the best range of recumbent tricycles and accessories you can buy.


HP Velo Scorpion FS 26 Folding Trike

HP Velo Scorpion FS 26 Folding Trike

Compared to the smaller 20-inch wheels conventionally found on recumbent trikes, the larger wheel on the suspended rear of the new Scorpion FS 26 model provides an even smoother ride, less rolling resistance, and easier obstacle traversing. The combination of full suspension with tried-and-tested chassis technology from the automotive engineering sector and the positive running properties of larger wheels sets new standards in riding dynamics. - (More Details)

Starting at $6,740.00

IN STOCK


HP Velo Scorpion FX Recumbent Trike

HP Velo Scorpion FX Recumbent Trike

The HP Velotechnik Scorpion FX trike is a folding trike with rear suspension, three different seat options, and many other possiblities for customization for your riding needs.
This trike is the ultimate folding trike for commuters and tourists who want a smooth comfortable ride, with a huge gear range to tackle almost any terrain. - (More Details)

Starting at $5,370.00

IN STOCK


HP Velo Scorpion FS 20 Folding Recumbent Trike

HP Velo Scorpion FS 20 Folding Recumbent Trike

Scared of taking on a few rocks or railroad tracks? From now on you are going to look forward to ride those little sweet challenges. Once you want to leave the beaten track, you are in need of a quick responding suspension, perfect road holding, precise steering and an optimum of steadiness. Now, the Scorpion FS is your perfect choice. This trike is for those who want to take the road less traveled. - (More Details)

Starting at $6,430.00


HP Velotechnik Scorpion FS Enduro

HP Velotechnik Scorpion FS Enduro

Hit the trails in this aggressive off-road machine!
The Scorpion FS-26 Enduro is a no frills, trail-ready monster, featuring knobby tires, and smooth suspension.

Based off the award winning Scorpion FS-26 this trike is ready for anything you can throw at it. - (More Details)

Starting at $7,220.00

IN STOCK


HP Velotechnik Gekko 26 US Edition - Sport Model

HP Velotechnik Gekko 26 US Edition - Sport Model

This is the HP Velotechnik Gekko 26 US Edition! A great budget friendly variety of HP trike with solid features. This is all the great qualities of a trike at its simplest. Allowing for an affordable trike while still having HP quality. - (More Details)

Starting at $2,850.00

IN STOCK


Hp Velotechnick Scorpion Recumbent Trike

Hp Velotechnick Scorpion Recumbent Trike

The German made Scorpion by HP Velotechnik is a 24-speed recumbent with a 26-inch rear wheel that's built around a Sturmey Archer 3-speed hub. It features rear suspension that can be fine tuned for ultimate comfort and lends itself to a variety of riding styles. - (More Details)

Starting at $5,160.00


HP Velotechnik Scorpion Plus 26 Recumbent Trike

HP Velotechnik Scorpion Plus 26 Recumbent Trike

Scorpion plus 26 - the upright, compact
full-suspension trike for daily use.
- (More Details)

Starting at $6,950.00


HP Velotechnik Scorpion Plus 20 Recumbent Trike

HP Velotechnik Scorpion Plus 20 Recumbent Trike

Scorpion plus 20 - the upright, compact
full-suspension trike for daily use. - (More Details)

Starting at $6,690.00


HP Velotechnik Gekko 26 US Edition - Comfort Model

HP Velotechnik Gekko 26 US Edition - Comfort Model

Comfort model
Specification:
Drivetrain: 10 speed
Derailleur rear: Sram GX
Cassette: Sram PG-1030, 10-speed
Shift lever: Sram SL-500
Chain: KMC X10 EL
Crankset: 39 teeth, 155 mm crank length, double chainguard
Brakes: Avid BB7 coupled mechanical disc brakes with 160 mm rotor
Tires: Schwalbe Road Cruiser 47-406
Pedals: VP 895
Front Hubs: HP Sport with thru-axle
headrest
handrest
seat angle adapter
parking brake
Gekko seat pad
2 piece handlebar with qr clamp for fast adjusting - (More Details)

$3,690.00 Starting at $3,500.00 SALE PRICE

IN STOCK


HP Velotechnik Hands-On-Cycle Scorpion fs 20

HP Velotechnik Hands-On-Cycle Scorpion fs 20

The all new HP Velotechnik Hands-On-Cycle takes the already established HP trikes and uses them as a base for the best handcycle adaptation yet! The HP Hands-On-Cycle is a boom integration for HP trikes, allowing you to utilize the amazing suspension of the Scorpion FS or the simple upright seating of the Gekko. The Choice is yours!

Unique integration: HP Velotechnik integrates the hand-operated drive including gears and cables in a closed housing. This is an enormous safety advantage. With the Hands-On-Cycle you avoid contact of with rotating and oily drive parts with your upper body and arms. Other advantages over conventional handcycles: The vehicles have an astonishingly small turning circle, and the tidy cockpit offers the best possible operating comfort.


- (More Details)

Starting at $9,420.00

IN STOCK


HP Velotecknik Hands-On-Cycle Gekko fx 26

HP Velotecknik Hands-On-Cycle Gekko fx 26

The all new HP Velotechnik Hands-On-Cycle takes the already established HP trikes and uses them as a base for the best handcycle adaptation yet! The HP Hands-On-Cycle is a boom integration for HP trikes, allowing you to utilize the amazing suspension of the Scorpion FS or the simple upright seating of the Gekko. The Choice is yours!

Unique integration: HP Velotechnik integrates the hand-operated drive including gears and cables in a closed housing. This is an enormous safety advantage. With the Hands-On-Cycle you avoid contact of with rotating and oily drive parts with your upper body and arms. Other advantages over conventional handcycles: The vehicles have an astonishingly small turning circle, and the tidy cockpit offers the best possible operating comfort. - (More Details)

Starting at $8,330.00

IN STOCK


HP Velotechnik Scorpion FS 26 with Custom Wheelset and Off-Road Tires Build#47254

HP Velotechnik Scorpion FS 26 with Custom Wheelset and Off-Road Tires Build#47254

One of our pre-built showroom models from 2024. This is an HP Velo Scorpion FS 26 in Cool Grey Metallic. This build comes with a 26 inch rear wheel, all around Schwalbe Smart Sam knobby tires, A single speed 32t gearing in the front, 11 speed gearing in the rear, and an entirely custom built wheel set with 1.75 inch rims, thicker spokes, and color matched blue nipples.


This listing is for the specific showroom build, limited quantity of 1 - (More Details)

Starting at $7,518.00

IN STOCK


HP Standing-Up Aid for Trikes without Front Suspension - Left

HP Standing-Up Aid for Trikes without Front Suspension - Left

$94.50

Stand-Up aid for HP Velotechnik non-front suspension trikes made from March of 2012 or later. Fits the Gekko, Gekko fx, Scorpion, Scorpion fx, Scorpion fx2 and Scorpion 2.

Product Notes:

Two variants: choose left or right.
Easily removed for folding on the Gekko fx and does not interfere with folding on the Scorpions.
These do not work if you have mirrors already installed onto your trikes kingpins as both the mirrors and stand up aids use the same mounting location. - (More Details)

IN STOCK


HP Headrest For Gekko and Scorpion ErgoMesh Seats

HP Headrest For Gekko and Scorpion ErgoMesh Seats

$189.00

The Head Rest,a retrofittable, sleek ergonomic accessory, height and tilt adjustable. Solid aluminum design with detachable and washable head pad with reflecting feature for passive safety. - (More Details)

IN STOCK


HP Velo Microbag for BodyLink Seat

HP Velo Microbag for BodyLink Seat

$49.00

HP Velotechnik's Microbag provides a safe place for the small but important things in life such as mobile phone, keys, wallet or the new rain cover for the recumbent seat. After cycling, the Microbag can be taken off the BodyLink hardshell seat using a Velcro fastener and then turns into a practical hip bag with hip belt. Holds one liter. Durable nylon with sealed zip and reflector strip. - (More Details)

IN STOCK


HP Standing-Up Aids for Scorpion FS

HP Standing-Up Aids for Scorpion FS

$299.00

Be kind to yourself. These Standing-up Aids for the Scorpion FS will make it easier to get in and out of the seat. - (More Details)

IN STOCK


HP Gekko  and Scorpion Full Fender Set 20in

HP Gekko and Scorpion Full Fender Set 20in

$315.00

Quality reinforced fender set for the HP Velotechnik Scorpion, Scorpion fx, Scorpion fx2, Gekko 20, Gekko fxs and Gekko fx20. All fenders feature extended rubber mud flaps for additional spray protection. Includes the pair of front fenders and a rear fender.

Fit Notes:

#39784 Fits the Gekko, Gekko fx, Scorpion made after 11/2011, and Scorpion fx made after 5/2011 with 1 1/8 inch mounts. - (More Details)

IN STOCK


HP Front Boom Quick Adjust System

HP Front Boom Quick Adjust System

$199.00

With quick release levers, for chain length compensation when front boom is adjusted, incl. length adjustable upper chain protection tube, for all models except Speedmachine, Spirit and Gekko fxs - (More Details)

IN STOCK


HP Gekko Rack for 20inch

HP Gekko Rack for 20inch

$99.00

Custom welded aluminum rear racks designed specifically for the HP Velotechnik Gekko fx 20 and Gekko fxs. Does not affect folding on the Gekko fx 20.

Large diameter rack tubing (10.7 mm) may require oversized pannier clamps.
Max Load 55 lbs.
Rack overall dimensions: 15.75" long x 11.25" high x 8.5" wide. (Widest point of the platform is 5 3/8") - (More Details)

IN STOCK


HP Ergomesh Seat - Pre 2013 Trikes

HP Ergomesh Seat - Pre 2013 Trikes

$459.00

For PRE 2013 HP trikes - (More Details)

IN STOCK


HP BodyLink Seat

HP BodyLink Seat

$650.00

(More Details)

IN STOCK


HP Padded Headrest for BodyLink Seat

HP Padded Headrest for BodyLink Seat

$139.00

The height and angle of the new carbon head rest can be adjusted, so that the head rest can be used either as a head or neck support and is also suitable for riders wearing a helmet (40 mm height adjustability / 28 degrees angle adjustability). The removable, washable padding is fitted with a reflector strip for good visibility in the dark and a belt for attaching a rechargeable rear light. - (More Details)

IN STOCK


HP Pannier Rack for Scorpion FS 26

HP Pannier Rack for Scorpion FS 26

$209.00

This sturdy luggage rack made of 14/16mm tubes for 2 panniers with a max weight capacity of 55lbs.The HP pannier racks have been optimized for the high lateral forces when riding a tricycle. Your panniers will hang low down and close to the driver, next to the rear wheel, with a good center of gravity. - (More Details)

IN STOCK


HP Velotechnik ErgoMesh & Gekko Seat Water Bottle Cage Kit

HP Velotechnik ErgoMesh & Gekko Seat Water Bottle Cage Kit

$69.00

Great waterbottles from Zefal. The shine-through material lets you see how much more 'fuel you got left. Big opening for easy cleaning. 0,6 Litre volume. - (More Details)

IN STOCK


HP Velo AirFlow Seat Cushion for BodyLink seat

HP Velo AirFlow Seat Cushion for BodyLink seat

$170.00

Optimal ventilation with the Airflow pad for the BodyLink bucket seat. The breathable mesh fabric is combined with comfortable padding which makes an even more confortable seat. - (More Details)

IN STOCK


HP Velotechnik Universal Computer Mount

HP Velotechnik Universal Computer Mount

$16.00

Computer head mount for HP Velotechnik bikes and trikes. Attaches to the boom and provides a tube to mount your computer.

- (More Details)

IN STOCK


HP Velotechnik Idler

HP Velotechnik Idler

$39.00

Replacement idler for Street Machines, Scorpion trikes, Gekko trikes, Grasshoppers and Speedmachines. - (More Details)

IN STOCK


HP Rear Rack for Scorpion Plus 20

HP Rear Rack for Scorpion Plus 20

$329.00

Custom welded aluminum rear racks designed specifically for the HP Velotechnik Scorpion PLUS and Scorpion PLUS fs20 trike series. Integrated design will not interfere with rear suspension action on the Scorpion series trikes.

Large diameter rack tubing (10.7 mm) may require oversized pannier clamps.
- (More Details)

IN STOCK


HP Safety Flag

HP Safety Flag

$29.00

HP Velotechnik branded reflective orange safety flag with 6mm pole works on all HP trikes and rear racks.

- (More Details)

IN STOCK


HP ErgoMesh HS Seat

HP ErgoMesh HS Seat

$539.00

Redesigned in 2013, the HP Velotechnik Ergomesh seat offers recumbent riders a relaxed seating position, comfort and breathability. The seat angle, seat pan length and back rest were all designed for maximum comfort and ergonomics. Four sizes are available. - (More Details)

IN STOCK


HP Fender Set (Scorpion FS 26)

HP Fender Set (Scorpion FS 26)

$299.00

For the Scorpion FS 26. Optimized protection with really elegant lines: Our design department went through tough R & D and revealed the HP Trikefender, robust fenders specially designed for trike use. The inner surface and the bottom edge are designed to provide maximum rider protection against spray, especially when cornering. - (More Details)


HP Velotechnik Front Axle & Cap

HP Velotechnik Front Axle & Cap

$55.00

OEM front Axle for all Current HP Velo trike models - (More Details)

IN STOCK


HP Hand Rest Set - Left and Right

HP Hand Rest Set - Left and Right

$159.00

Adjustable handrests for your HP Velotechnik recumbent. Also fits most other handlebars with a 22.2 mm diameter.

Sold as a pair with a left and a right. Relieves your hands from having to constantly grip the handlebars tightly. - (More Details)

IN STOCK


HP Tall Handlebar Set for Scorpion Trikes

HP Tall Handlebar Set for Scorpion Trikes

$59.00

Long, two parts steering bar for Scorpion trikes and is adjustable in width. This steering bar provides a 8cm higher position and is ideal for riders with shorter arms. Necessary when using ErgoMesh HS seat. - (More Details)


HP Velotechnik Universal T-Bar Mount

HP Velotechnik Universal T-Bar Mount

$45.00

The Universal T-Bar Mount adds a solution to have your GPS, mobile phone, or any other small electronic device in your field of view. It is available for under seat steering with twist shifter. Retrofittable.

- (More Details)

IN STOCK


HP Accessory Mount

HP Accessory Mount

$22.99

Bar end accessory mount - (More Details)

IN STOCK


HP Velotechnik Top Load Rack for Scorpion

HP Velotechnik Top Load Rack for Scorpion

$199.00

Additional luggage carrier above the rear wheel, maximum payload 10 kg, normal rear rack required for fastening. - (More Details)

IN STOCK


HP Computer Sensor Mount

HP Computer Sensor Mount

$18.00

For all HPV Trikes: Attaches to the bottom of a tie rod and provides a place to mount your computer sensor. - (More Details)

IN STOCK


HP Battery Mount for Scorpion Trikes - Right Side

HP Battery Mount for Scorpion Trikes - Right Side

$179.00

For primary battery on Scorpion 2 /fs 26 /fs 26 Enduro

Includes hardware kit - (More Details)

IN STOCK


HP Battery Mount for Scorpion Trikes - For 2nd battery - Left Side

HP Battery Mount for Scorpion Trikes - For 2nd battery - Left Side

$179.00

For 2nd battery on Scorpion 2 /fs 26 /fs 26 Enduro

Includes hardware kit - (More Details)

IN STOCK


HP Velotechnik BodyLink Seat Water Bottle Cage Kit for Speedmachine & All Scorpion Models

HP Velotechnik BodyLink Seat Water Bottle Cage Kit for Speedmachine & All Scorpion Models

$69.00

Water bottle kits for HP Velotechnik bikes and trikes. Includes two water bottles and bottle cages. Kits feature a retaining plate or mounts specific to your seat style and bike or trike model.

Fit Notes:

Fits BodyLink seats on the Scorpion fx, Scorpion fx 2, Scorpion 2, Scorpion fs 20 and Scorpion fs 26, Scorpion Plus 20, Scorpion Plus 26. The hardware bolts behind the middle seat bracket.
Please refer to your bike or trike owner's manual for installation instructions. If you have lost your manual, you can find downloadable PDF's at HP Velotechnik's website. - (More Details)

IN STOCK


HP Velotechnik Rear Derailleur Hanger

HP Velotechnik Rear Derailleur Hanger

$11.00

Replacement derailleur hanger for your HP Velotechnik recumbent.
Fits all models except the Sprint
- (More Details)

IN STOCK


HP Gekko Battery Mount - Left Side

HP Gekko Battery Mount - Left Side

$179.00

Fits Gekko FX 20 and FX 26.

- (More Details)

IN STOCK


HP Seat Quick Release Lever - Lower Seat Connection M5 x 88

HP Seat Quick Release Lever - Lower Seat Connection M5 x 88

$24.00

Replacement seat quick release levers fit all ErgoMesh and BodyLink seats with three points of attachment: lower, middle and upper. Includes skewer and skewer nut.

- (More Details)

IN STOCK


HP Velotechnik Front Suspension Rubber Strut Bearing LTDLSFS

HP Velotechnik Front Suspension Rubber Strut Bearing LTDLSFS

$20.00

Internal Eastomer Bearing for the HP Velotechnik front suspension. HPV part number LTDLSFS. - (More Details)

IN STOCK


HP Rear Rack for Scorpion Plus 26

HP Rear Rack for Scorpion Plus 26

$249.00

This rear rack custom designed for the HP Velotechnik Scorpion Plus 26 features 14mm tubing, sporty black design, and has a max load of 55lbs (25kg). Designed to be used with panniers only.
Also works with Top Load Extension Rack. - (More Details)

IN STOCK


HP Spring for Front Suspension Struts - Hard

HP Spring for Front Suspension Struts - Hard

$15.90

For riders above 90kg or 198lbs. - Yellow - (More Details)

IN STOCK


HP Gekko Seat Pad

HP Gekko Seat Pad

$159.00

Take a seat and feel good: The seat pad makes your Gekko really cuddly. This is particularly appreciated by drivers with a slightly wider stature and those who are more likely to travel on very rough surfaces, such as cobblestone pavements. The seat pad is mounted on top of the regular seat. - (More Details)


HP Velotechnik Fender Set Fits Scorpion FS 20 / 26 & Scorpion FS Plus 20 / 26

HP Velotechnik Fender Set Fits Scorpion FS 20 / 26 & Scorpion FS Plus 20 / 26

$299.00

for Scorpion fs 20 /fs 26 /fs 26 S-Pedelec and Scorpion
plus 20 /plus 26, incl. mudguard holders, for models before 2012 a pair of mudguard clips (SBZUSESFS) is required
- (More Details)

IN STOCK


HP Scorpion battery mount kit - Right

HP Scorpion battery mount kit - Right

$179.00

RIGHT PRIMARY battery mount on Scorpion fs 20 /plus 20 /plus 26, ALSO used to mount 2nd battery on Scorpion /fx /fx 2

Includes all hardware. - (More Details)

IN STOCK


HP Standing-Up Aid for Trikes without Front Suspension - Right

HP Standing-Up Aid for Trikes without Front Suspension - Right

$94.50

Stand-Up aid for HP Velotechnik non-front suspension trikes made from March of 2012 or later. Fits the Gekko, Gekko fx, Scorpion, Scorpion fx, Scorpion fx2 and Scorpion 2.

Product Notes:

Two variants: choose left or right.
Easily removed for folding on the Gekko fx and does not interfere with folding on the Scorpions.
These do not work if you have mirrors already installed onto your trikes kingpins as both the mirrors and stand up aids use the same mounting location. - (More Details)

IN STOCK


HP Velotechnik DV22 Rear Shock Spring - 450lbs

HP Velotechnik DV22 Rear Shock Spring - 450lbs

$19.00

Rear Shock Replacement Springs for your HP Velotechnik. Fits the DNM-DV22 shock.

Specifications

83 mm long
450 lbs/in fits rider and load weight range of up to 176 lbs
550 lbs/in fits rider and load weight range of 176 to 220 lbs
650 lbs/in fits rider and load weight range of 220 to 308 lbs - (More Details)

IN STOCK


HP Computer and Sensor Mount Set

HP Computer and Sensor Mount Set

$31.00

HP Universal computer AND sensor mount set.
For all HPV Trikes: Attaches to the bottom of a tie rod and provides a place to mount your computer sensor.

- (More Details)

IN STOCK


HP Velotechnik Universal TopView Mount

HP Velotechnik Universal TopView Mount

$45.00

For mounting on a bar-end shifter. - (More Details)


HP Velotechnik Replacement Heel Strap

HP Velotechnik Replacement Heel Strap

$39.00

Rear heel strap ONLY. - (More Details)

IN STOCK


HP Velotechnik Anti-Roll Bar - HARD

HP Velotechnik Anti-Roll Bar - HARD

$59.00

Make your trike's front suspension softer or harder, depending on your weight and load capacity. the anti-roll bar, which comes in white (soft) or grey (hard), works in conjunction with the Front Springs, which come in red (soft) or yellow (hard).

Use with HP Velotechnik trikes equipped with front suspension.

Note: does not fit the Scorpion Plus models. For the Scorpion fs 20/26 Plus models, use the appropriate strength (Blue, White or Gray) HP Velotechnik Anti Sway Bar for Scorpion fs 20/26 Plus.

Specifications

Anti-roll bar white (soft) fits riders 198 lbs and under
Anti-roll bar grey (hard) fits riders 198 lbs and over - (More Details)

IN STOCK


HP Scorpion battery mount kit - Left

HP Scorpion battery mount kit - Left

$179.00

LEFT PRIMARY battery mount on Scorpion /fx /fx 2, ALSO used to mount 2nd battery on Scorpion fs 20/plus 20 /plus 26

Includes all hardware. - (More Details)

IN STOCK


HP Velotechnik DV22 Rear Shock Spring - 550lbs

HP Velotechnik DV22 Rear Shock Spring - 550lbs

$19.00

Rear Shock Replacement Springs for your HP Velotechnik. Fits the DNM-DV22 shock.

Specifications

83 mm long
450 lbs/in fits rider and load weight range of up to 176 lbs
550 lbs/in fits rider and load weight range of 176 to 220 lbs
650 lbs/in fits rider and load weight range of 220 to 308 lbs - (More Details)

IN STOCK


HP Standing Up Aid for Trikes with Front Suspension - Right Side

HP Standing Up Aid for Trikes with Front Suspension - Right Side

$149.50

HP Velotechnik full suspension trikes just got easier to get on and off of, thanks to the new Stand-Up Aid. Clamps to the frame on all 2013 and newer Scorpion fs trikes.

- (More Details)

IN STOCK


HP Velotechnik 26in Rear Mudguard

HP Velotechnik 26in Rear Mudguard

$32.00

These fenders from SKS, which are equipped with a deflector, extend far down close to the road. With their width of 55 millimetres (2.2″), they provide good protection against splash water even with wider tires. The protectors are made of robust polymer and rest on an elegant, internal mounting that nestles smoothly into the frame design.

One 26" rear fender only. Complete with mounting hardware. - (More Details)

IN STOCK


HP Rear Rack for Scorpion FS 20

HP Rear Rack for Scorpion FS 20

$329.00

Fits Scorpion FS20 - (More Details)

IN STOCK


HP Velotechnik Side Bag Mount Gekko

HP Velotechnik Side Bag Mount Gekko

$169.00

Side Bag Mounts for Gekko:

Need some easy to reach storage? Our pair of Side Bag Mounts is fully adjustable with a max. payload of 11 lbs. per side. Compatible with many clamp-on accessories.

Includes mounts for left and right sides, with mounting hardware and instructions. Retrofittable and ready to ship.
They are available for Scorpion trikes with ErgoMesh seat and all Gekkos. - (More Details)

IN STOCK


HP Standing Up Aid for Trikes with Front Suspension - Left Side

HP Standing Up Aid for Trikes with Front Suspension - Left Side

$149.50

HP Velotechnik full suspension trikes just got easier to get on and off of, thanks to the new Stand-Up Aid. Clamps to the frame on all 2013 and newer Scorpion fs trikes.

- (More Details)

IN STOCK


HP ErgoMesh Premium Mesh Seat

HP ErgoMesh Premium Mesh Seat

$899.99

The elaborate 3D upholstered seat surface not only provides maximum seating comfort, but also ensures pleasant ventilation and optimum rain suitability. For example, special knitted fabrics have been used which not only wick away body moisture when driving with dedication, but also ensure that rainwater is not stored in the upholstery – in case the optional rain cover has been forgotten.

Standard width 41 cm - (More Details)


HP Single Crank 39T 170mm

$89.00 $44.50 SALE PRICE

(More Details)

IN STOCK


HP Velotechnik Seat Angle Adapter Gekko

HP Velotechnik Seat Angle Adapter Gekko

$119.00

The HP Velotechnik Seat Angle Adapter can be mounted to the Gekko, Gekko fx, and Gekko fx 26. It provides a more upright seat back position by up to 9 degrees. The more upright seat position can now be continuously adjusted up to appx 48 - 56 degrees.

- (More Details)

IN STOCK


HP Gekko Rack for 26 inch

HP Gekko Rack for 26 inch

$99.00

Fits Gekko FX 26 - (More Details)

IN STOCK


HP Velotechnik Anti-Roll Bar - SOFT

HP Velotechnik Anti-Roll Bar - SOFT

$59.00

Make your trike's front suspension softer or harder, depending on your weight and load capacity. the anti-roll bar, which comes in white (soft) or grey (hard), works in conjunction with the Front Springs, which come in red (soft) or yellow (hard).

Use with HP Velotechnik trikes equipped with front suspension.

Note: does not fit the Scorpion Plus models. For the Scorpion fs 20/26 Plus models, use the appropriate strength (Blue, White or Gray) HP Velotechnik Anti Sway Bar for Scorpion fs 20/26 Plus.
Anti-roll bar white (soft) fits riders 198 lbs and under
Anti-roll bar grey (hard) fits riders 198 lbs and over - (More Details)

IN STOCK


HP Velotechnik 20in Rear Mudguard

HP Velotechnik 20in Rear Mudguard

$30.00

These fenders from SKS, which are equipped with a deflector, extend far down close to the road. With their width of 55 millimetres (2.2″), they provide good protection against splash water even with wider tires. The protectors are made of robust polymer and rest on an elegant, internal mounting that nestles smoothly into the frame design.

Rear fender only. Complete with mounting hardware. Part # SBZUKTHR - (More Details)

IN STOCK


HP Velotechnik Lowrider Rack for Scorpion

HP Velotechnik Lowrider Rack for Scorpion

$159.00

Scorpion fx /fx 2 /plus 20 /plus 26 10 mm aluminium tube 6061 T4, heat treated, black
powdercoated, max. load 25 kg / 55 lbs (rear rack needed for attachement) - (More Details)

IN STOCK


HP Velotechnik Middle Quick Release Seat Lever

HP Velotechnik Middle Quick Release Seat Lever

$24.00

Replacement seat quick release levers fit all ErgoMesh and BodyLink seats with three points of attachment: lower, middle and upper. Includes skewer and skewer nut.

- (More Details)

IN STOCK


HP Adjustable End Stops

HP Adjustable End Stops

$25.00

Addition stops to return your seat adjuster in your chosen position after folding.

- (More Details)

IN STOCK


HP Velotechnik Upper Quick Release Seat Lever for Gekko

HP Velotechnik Upper Quick Release Seat Lever for Gekko

$12.00

Replacement seat quick release levers fits all Gekko seats. Includes skewer and skewer nut.

- (More Details)

IN STOCK


HP Velotechnik Upper Quick Release Seat Lever W/ Velcro Strap

HP Velotechnik Upper Quick Release Seat Lever W/ Velcro Strap

$32.00

Replacement seat quick release levers fit all ErgoMesh and BodyLink seats with three points of attachment: lower, middle and upper. Includes skewer and skewer nut.

- (More Details)

IN STOCK


HP ErgoMesh Premium XL Seat

HP ErgoMesh Premium XL Seat

$899.00

The elaborate 3D upholstered seat surface not only provides maximum seating comfort, but also ensures pleasant ventilation and optimum rain suitability. For example, special knitted fabrics have been used which not only wick away body moisture when driving with dedication, but also ensure that rainwater is not stored in the upholstery – in case the optional rain cover has been forgotten.

XL width 46 cm with 3 cm increased seat depth and backrest height - (More Details)

IN STOCK


HP Velotechnik Quick Release Seat Lever Gekko

HP Velotechnik Quick Release Seat Lever Gekko

$15.00

Replacement Quick Release for the HP Velotechnik Seat Angle Adapter (for the Gekko, Gekko fx, and Gekko fx 26). Shaft length is 112mm overall. Black.

- (More Details)

IN STOCK


Hp Velotechnik 20 in Rear Wheel

$189.00

OEM laced 20 in rear wheel for use with HP Trikes - (More Details)


HP Spring for Front Suspension Struts - Standard FGZUFESFS1

HP Spring for Front Suspension Struts - Standard FGZUFESFS1

$19.99

For riders below 90kg or 198lbs. - Red

Manufacturer Part # FGZUFESFS1 - (More Details)

IN STOCK


HP Velotechnik Seat Rain Cover

HP Velotechnik Seat Rain Cover

$25.00

Made of durable ripstop nylon, the light cover keeps the recumbent’s seat dry and clean when parked. When not in use, it is kept in the integrated zip bag on the ErgoMesh seat or, for cyclists with a BodyLink hardshell seat, in HP Velotechnik’s new optional Microbag. If you have a BodyLink seat, the Microbag has a Velcro strip that the rain cover attaches to. Otherwise, you will need to put the included Velcro strip on your seat back to secure the rain cover. Color: blue with HP Velotechnik logo. Elastic cord with cord lock. - (More Details)

IN STOCK


HP ErgoMesh Premium HS XL Seat

HP ErgoMesh Premium HS XL Seat

$899.00

The elaborate 3D upholstered seat surface not only provides maximum seating comfort, but also ensures pleasant ventilation and optimum rain suitability. For example, special knitted fabrics have been used which not only wick away body moisture when driving with dedication, but also ensure that rainwater is not stored in the upholstery – in case the optional rain cover has been forgotten.

XL width 46 cm with 3 cm increased seat depth and backrest height
HS = 11 cm additional height - (More Details)


HP ErgoMesh Premium HS Seat

HP ErgoMesh Premium HS Seat

$899.00

The elaborate 3D upholstered seat surface not only provides maximum seating comfort, but also ensures pleasant ventilation and optimum rain suitability. For example, special knitted fabrics have been used which not only wick away body moisture when driving with dedication, but also ensure that rainwater is not stored in the upholstery – in case the optional rain cover has been forgotten.

Standard width 41 cm
HS = 11 cm additional height - (More Details)

IN STOCK


HP Velotechnik Stabilizer Bracket With Bushing

HP Velotechnik Stabilizer Bracket With Bushing

$22.50

Manufacturer part # FGZUSTHB - (More Details)

IN STOCK


HP Velotechnik ErgoMesh Seat - Standard

HP Velotechnik ErgoMesh Seat - Standard

$539.00

Redesigned in 2013, the HP Velotechnik Ergomesh seat offers recumbent riders a relaxed seating position, comfort and breathability. The seat angle, seat pan length and back rest were all designed for maximum comfort and ergonomics. Four sizes are available.

Product Notes & Sizing:

All seats have three mounting points and work on bikes and trikes from 2010 and later.
The ErgoMesh Standard Seat and the ErgoMesh X-large Seat are about 1.2inch (3 cm) higher than the BodyLink seat.
The ErgoMesh Standard High Seat and the ErgoMesh X-Large High Seat are 3.1inch (8 cm) higher than the standard height ErgoMesh seats.
For the Street Machine, if you want to convert an older BodyLink seat setup to the ErgoMesh seat setup, your BodyLink seat must have three mounts, and you will need to get the Street Machine Wide Handlebars for bikes with under seat steering to accomodate the ErgoMesh seat. You may also need longer cables and housings for the new wide bars.
For Scorpion trikes, if you want to add a High Seat (Standard or X-Large), you will need Long Handlebars. You may also need new cables and housing for the longer bars.
Seat height from ground ErgoMesh Standard Seat and ErgoMesh X-Large Seat: 13inch (32 cm)
Seat height from ground ErgoMesh Standard High Seat and ErgoMesh X-Large High Seat: 17inch (43 cm)
Seat angle: 41–49inch adjustable
Standard Seat and Standard High Seat are 15inch (38cm) wide, 9.8inch (25cm) deep (seat bottom) and 21.7inch(55 cm) high (seat back)
X-Large and X-Large High Seat are 17inch (43cm) wide, 11.8inch (30cm) deep (seat bottom), and 23.2inch (59cm) high (seat back) - (More Details)

IN STOCK


HP Front Suspension MCU Elastomer Springs for 20in - 4 Pack (FGZUELSFS1)

HP Front Suspension MCU Elastomer Springs for 20in - 4 Pack (FGZUELSFS1)

$22.00

MCU elastomer spring for front suspension struts, 12 mm, for Scorpion fs 20 /plus 20
(Includes 4 elastomers)

Manufacturer part # FGZUELSFS1 - (More Details)

IN STOCK


HP Velotechnik Lower Chaintube For Scorpion FS Trikes

HP Velotechnik Lower Chaintube For Scorpion FS Trikes

$24.00

Flanged edges, foldable, with rubber support. - (More Details)

IN STOCK


HP Velotechnik Upper Chaintubes For Scorpion FS26 Trikes

HP Velotechnik Upper Chaintubes For Scorpion FS26 Trikes

$34.00

Flanged edges, foldable, with mounting springs. Can cut to fit Scorpion FS20 - (More Details)

IN STOCK


HP Shock Boot for Front Suspension Struts Blue - FGZUFBFSBL

HP Shock Boot for Front Suspension Struts Blue - FGZUFBFSBL

$11.00

Manufacturer part # FGZUFBFSBL - (More Details)

IN STOCK


HP Front Suspension Adjusting Disc Spring - FGZUPASFS

HP Front Suspension Adjusting Disc Spring - FGZUPASFS

$14.00

Manufacturer part # FGZUPASFS - (More Details)

IN STOCK


HP ErgoMesh HS XL Seat

HP ErgoMesh HS XL Seat

$539.00

Redesigned in 2013, the HP Velotechnik Ergomesh seat offers recumbent riders a relaxed seating position, comfort and breathability. The seat angle, seat pan length and back rest were all designed for maximum comfort and ergonomics. Four sizes are available.

Product Notes & Sizing:

All seats have three mounting points and work on bikes and trikes from 2010 and later.
The ErgoMesh Standard Seat and the ErgoMesh X-large Seat are about 1.2inch (3 cm) higher than the BodyLink seat.
The ErgoMesh Standard High Seat and the ErgoMesh X-Large High Seat are 3.1inch (8 cm) higher than the standard height ErgoMesh seats.
For the Street Machine, if you want to convert an older BodyLink seat setup to the ErgoMesh seat setup, your BodyLink seat must have three mounts, and you will need to get the Street Machine Wide Handlebars for bikes with under seat steering to accomodate the ErgoMesh seat. You may also need longer cables and housings for the new wide bars.
For Scorpion trikes, if you want to add a High Seat (Standard or X-Large), you will need Long Handlebars. You may also need new cables and housing for the longer bars.
Seat height from ground ErgoMesh Standard Seat and ErgoMesh X-Large Seat: 13inch (32 cm)
Seat height from ground ErgoMesh Standard High Seat and ErgoMesh X-Large High Seat: 17inch (43 cm)
Seat angle: 41–49inch adjustable
Standard Seat and Standard High Seat are 15inch (38cm) wide, 9.8inch (25cm) deep (seat bottom) and 21.7inch(55 cm) high (seat back)
X-Large and X-Large High Seat are 17inch (43cm) wide, 11.8inch (30cm) deep (seat bottom), and 23.2inch (59cm) high (seat back) - (More Details)

IN STOCK


HP Front Hard Suspension MCU Elastomer Springs for 26in - 4 Pack  (FGZUELSFS2)

HP Front Hard Suspension MCU Elastomer Springs for 26in - 4 Pack (FGZUELSFS2)

$22.00

For front suspension struts, 13.5mm for Scorpion fs 26 /plus 26 /fs 26 S-Pedelec
(Includes 4 elastomers)

Manufacturer part # FGZUELSFS2 - (More Details)

IN STOCK


HP ErgoMesh XL Seat

HP ErgoMesh XL Seat

$539.00

Redesigned in 2013, the HP Velotechnik Ergomesh seat offers recumbent riders a relaxed seating position, comfort and breathability. The seat angle, seat pan length and back rest were all designed for maximum comfort and ergonomics. Four sizes are available.

Product Notes & Sizing:

All seats have three mounting points and work on bikes and trikes from 2010 and later.
The ErgoMesh Standard Seat and the ErgoMesh X-large Seat are about 1.2inch (3 cm) higher than the BodyLink seat.
The ErgoMesh Standard High Seat and the ErgoMesh X-Large High Seat are 3.1inch (8 cm) higher than the standard height ErgoMesh seats.
For the Street Machine, if you want to convert an older BodyLink seat setup to the ErgoMesh seat setup, your BodyLink seat must have three mounts, and you will need to get the Street Machine Wide Handlebars for bikes with under seat steering to accomodate the ErgoMesh seat. You may also need longer cables and housings for the new wide bars.
For Scorpion trikes, if you want to add a High Seat (Standard or X-Large), you will need Long Handlebars. You may also need new cables and housing for the longer bars.
Seat height from ground ErgoMesh Standard Seat and ErgoMesh X-Large Seat: 13inch (32 cm)
Seat height from ground ErgoMesh Standard High Seat and ErgoMesh X-Large High Seat: 17inch (43 cm)
Seat angle: 41–49inch adjustable
Standard Seat and Standard High Seat are 15inch (38cm) wide, 9.8inch (25cm) deep (seat bottom) and 21.7inch(55 cm) high (seat back)
X-Large and X-Large High Seat are 17inch (43cm) wide, 11.8inch (30cm) deep (seat bottom), and 23.2inch (59cm) high (seat back) - (More Details)


HP Shock Boot for Front Suspension Struts Black - FGZUFBSFS

HP Shock Boot for Front Suspension Struts Black - FGZUFBSFS

$11.00

Manufacturer part # FGZUFBSFS - (More Details)

IN STOCK


HP Front Suspension Foil Insert - FGZUEFO

HP Front Suspension Foil Insert - FGZUEFO

$4.00

Manufacturer part # FGZUEFO - (More Details)

IN STOCK


HP Velotechnik Replacement Heel Support

$25.00

SINGLE Replacement Heel Supports - (More Details)

IN STOCK


HP 20 inch Fender Stay - Short

HP 20 inch Fender Stay - Short

$5.00

1 per rear fender needed - (More Details)

IN STOCK


HP Velotechnik Gekko fx Folding Buffer M6

HP Velotechnik Gekko fx Folding Buffer M6

$12.00

Rubber bumper designed to help protect your Gekko while folded. Mounts to the frame.

- (More Details)

IN STOCK


HP Axial Needle Bearing - D3LAAX0619

HP Axial Needle Bearing - D3LAAX0619

$11.00

Manufacturer part # D3LAAX0619 - (More Details)

IN STOCK


HP Velotechnik Chain Catch Hook

HP Velotechnik Chain Catch Hook

$7.00

HP Velotechnik Chain Catch Hook

Keeps Chain from slipping off the Idler Pulley

For use with most Scorpion Models. Fits the standard HP Velotechnik 95mm idler pulley (8mm bolt diameter). - (More Details)

IN STOCK


HP Velotechnik Rear Fender Hardware

HP Velotechnik Rear Fender Hardware

$10.00

1 per rear fender required.

Replacement mounting hardware for HP Velotechnik Rear Fenders.

- (More Details)

IN STOCK


HP Velotechnik Spacer 1inch Black 2 mm

HP Velotechnik Spacer 1inch Black 2 mm

$4.00

These are between the top dust cap, one on bottom one on top. You will need two! Manufacturer part # SPACER - (More Details)


HP Velotechnik DV22 Rear Shock Spring - 650lbs

HP Velotechnik DV22 Rear Shock Spring - 650lbs

$19.00

Rear Shock Replacement Springs for your HP Velotechnik. Fits the DNM-DV22 shock.

Specifications

83 mm long
450 lbs/in fits rider and load weight range of up to 176 lbs
550 lbs/in fits rider and load weight range of 176 to 220 lbs
650 lbs/in fits rider and load weight range of 220 to 308 lbs - (More Details)

IN STOCK


HP Velotechnik 26 Inch Tripleshift Rear Wheel

$299.00

HP factory wheel with a Sturmey Archer 3-speed hub. - (More Details)


HP 20 inch Fender Stay - Long

HP 20 inch Fender Stay - Long

$5.00

1 per fender needed - (More Details)

IN STOCK


HP 26 inch Fender Stay - Long

HP 26 inch Fender Stay - Long

$5.00

1 per rear fender - (More Details)


HP Front Suspension Cover for Strut Mount Upper - KUGUASO

HP Front Suspension Cover for Strut Mount Upper - KUGUASO

$3.00

Manufacturer Part # KUGUASO - (More Details)

IN STOCK


HP 26 inch Fender Stay - Short

HP 26 inch Fender Stay - Short

$5.00

1 per rear fender needed - (More Details)

IN STOCK


Results 1 - 154 of 154

Go to Page: 1



UtahTrikes.com is a wholly owned subsidiary of Guy Graphics, Inc.
Copyright © 2006-2024 All Rights Reserved.
Materials on this site may not be used without express written permission.