Bosch Smart System Alarm / Connect Module Bundle
$199.00
Availability: Currently Out of Stock
To use eBike Alarm, the eBike Lock feature must be activated in the eBike Flow app and the new ConnectModule installed on the eBike. The fee-based component is installed concealed on the eBike by a specialist retailer and contains a radio and GPS module, a separate battery and various sensors. The eBike Alarm can only be used once the ConnectModule has been installed.
- This includes the following parts
Design Cover Left (EB11.200.03X)
Connect Module w/ Grounding plate (EB13.200.02M)
Design cover screw M4x8 (1270.016.499)
Module Holder BCM3100 (EB13.200.012)
Display Cable HMI 100mm (EB12.120.035)
The eBike Alarm simply requires one-time activation via the eBike Flow app. The feature is always active, with an existing GPS connection when the eBike system is switched off. The smartphone serves as the key. At the same time, users can see the location and security status of their eBike at any time in the eBike Flow app. The eBike is therefore protected and easy to find again.
- This includes the following parts
Design Cover Left (EB11.200.03X)
Connect Module w/ Grounding plate (EB13.200.02M)
Design cover screw M4x8 (1270.016.499)
Module Holder BCM3100 (EB13.200.012)
Display Cable HMI 100mm (EB12.120.035)
The eBike Alarm simply requires one-time activation via the eBike Flow app. The feature is always active, with an existing GPS connection when the eBike system is switched off. The smartphone serves as the key. At the same time, users can see the location and security status of their eBike at any time in the eBike Flow app. The eBike is therefore protected and easy to find again.
